### jgobat 04/06/21 15:27:49
+++ cmdfile (300 bytes, 151892993 checksum)
$T_MISSION,30
$T_DIVE,15
$D_ABORT,110
$D_TGT,45
$N_DIVES,1
$D_NO_BLEED,50
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,1
$MAX_BUOY,150
$QUIT
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 30.
WARNING! $T_MISSION,30.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 15.
Value of $D_ABORT will be set to 110.
Value of $D_TGT will be set to 45.
Value of $N_DIVES will be set to 1.
Value of $D_NO_BLEED will be set to 50.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 1.
Value of $MAX_BUOY will be set to 150.
T_ABORT (0.000000) must not be <= T_MISSION (30.000000)
$QUIT given - will enter or continue in recovery
### jgobat 04/06/21 16:14:20
+++ cmdfile (302 bytes, 739402877 checksum)
$T_MISSION,30
$T_DIVE,15
$D_ABORT,110
$D_TGT,45
$N_DIVES,1
$D_NO_BLEED,50
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,1
$MAX_BUOY,150
$RESUME
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 30.
WARNING! $T_MISSION,30.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 15.
Value of $D_ABORT will be set to 110.
Value of $D_TGT will be set to 45.
Value of $N_DIVES will be set to 1.
Value of $D_NO_BLEED will be set to 50.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 1.
Value of $MAX_BUOY will be set to 150.
T_ABORT (0.000000) must not be <= T_MISSION (30.000000)
$RESUME given - will start or continue diving
### jgobat 04/06/21 16:18:17
+++ cmdfile (300 bytes, 151892993 checksum)
$T_MISSION,30
$T_DIVE,15
$D_ABORT,110
$D_TGT,45
$N_DIVES,1
$D_NO_BLEED,50
$T_NO_W,120
$PITCH_ADJ_GAIN,0.045
$PITCH_ADJ_DBAND,2
$C_VBD,2800
$ALTIM_PING_DEPTH,120
$ALTIM_PING_DELTA,10
$ALTIM_PULSE,1
$ALTIM_SENSITIVITY,3
$ALTIM_FREQUENCY,13
$PROTOCOL,9
$PHONE_DEVICE,33 
$N_NOCOMM,1
$MAX_BUOY,150
$QUIT
--- validation against - (latest dive is 0)
Value of $T_MISSION will be set to 30.
WARNING! $T_MISSION,30.0000: Must be less than $T_ABORT!
Value of $T_DIVE will be set to 15.
Value of $D_ABORT will be set to 110.
Value of $D_TGT will be set to 45.
Value of $N_DIVES will be set to 1.
Value of $D_NO_BLEED will be set to 50.
Value of $T_NO_W will be set to 120.
Value of $PITCH_ADJ_GAIN will be set to 0.045.
Value of $PITCH_ADJ_DBAND will be set to 2.
Value of $C_VBD will be set to 2800.
WARNING! $C_VBD,2800.0000: Center must be between HW min and max!
Value of $ALTIM_PING_DEPTH will be set to 120.
Value of $ALTIM_PING_DELTA will be set to 10.
Value of $ALTIM_PULSE will be set to 1.
Value of $ALTIM_SENSITIVITY will be set to 3.
Value of $ALTIM_FREQUENCY will be set to 13.
Value of $PROTOCOL will be set to 9.
Value of $PHONE_DEVICE will be set to 33.
Value of $N_NOCOMM will be set to 1.
Value of $MAX_BUOY will be set to 150.
T_ABORT (0.000000) must not be <= T_MISSION (30.000000)
$QUIT given - will enter or continue in recovery