WA coast Apr11 * SG187 * Dive index * Mission links * Dive 88 * Raw log
prev dive * next dive * dive
• Previous call tries 5 • 9.69 of 150.00 AH used of 24V (93.54% remains)
• Previous NAKs 0, Timeouts 0 • 6.80 of 100.00 AH used of 10V (93.20% remains)
• Surface angle -75.8 deg, depth 1.06 m • Intended pitch -27.4 deg, speed -20.000 cm/s
• GPS1 time: 8 s, HDOP was 2.2 m • bottom range 20.4 m at 70.6 m, depth 91 m (120 m grid)
• GPS2 time: 14 s, HDOP was 2.2 m • Transponder ping count: 0
• Time spent turning 0 s

Statistics * Plot
t(s) depth(m) w(cm/s) num pts t(s) GC phase pitch roll VBD pit rol VBD volts
ctl(cm) t(s) A pos(AD) rate t(s) A pos(AD) rate ctl(cc) t(s) A pos(AD) rate eff r e r e r e pitrollvbd flags
12 end surface: CONTROL_FINISHED_OK
13 begin dive
15 - - - 102 VBD -1.03 - - 130 - - - 2115 - -195.5 -84.68 - 2998 - - - - - - - - - - -
106 4.2 -9.7 13 128 roll -1.03 9.95 0.241 2608 249.0 2.42 0.066 3613 619.0 -195.5 -5.93 - 3335 -56.8 - - - - - - - - - -
256 56.2 -24.0 40 263 done -1.02 - - 2608 - 2.40 0.043 2085 -636.7 -195.5 - - 3338 - - - - - - - - - - -
331 73.3 -20.9 53 339 roll -1.01 - - 2596 - 2.45 0.057 3605 620.4 -195.5 - - 3338 - - - - - - - - - - -
360 end dive: BOTTOM_OBSTACLE_DETECTED
360 begin apogee
369 79.8 21.3 58 533 done -0.23 0.90 0.155 2872 306.7 - - 1942 - - 154.52 0.606 2534 -5.2 0.070 - - - - - - - - -
534 end apogee: CONTROL_FINISHED_OK
534 begin climb
537 86.8 - 83 709 roll 1.03 1.23 0.089 3282 333.3 2.58 0.054 3450 584.5 195.5 157.75 0.581 1736 -5.1 0.077 - - - - - - - - -
750 48.8 25.2 116 758 done 1.01 - - 3293 - 2.45 0.043 1955 -610.2 195.5 - - 1730 - - - - - - - - - - -
823 33.5 18.6 129 844 done 1.01 - - 3293 - - - 1954 - 215.7 16.48 0.528 1654 -4.6 0.030 - - - - - - - - -
908 16.6 19.7 144 916 done 1.01 - - 3293 - - - 1954 - 220.8 5.38 0.429 1633 -3.9 0.015 - - - - - - - - -
947 end climb: FINISH_DEPTH_REACHED
947 begin subsurface finish
954 9.6 -17.2 151 989 roll -0.02 1.10 0.146 2960 -302.7 2.45 0.070 3457 613.5 -30.6 -25.50 - 2661 -40.3 - - - - - - - - - -
990 end subsurface finish: CONTROL_FINISHED_OK
990 begin surface